Specification:
|
Specification |
|
|
Size |
H2300*W900*D560mm |
|
Material |
0.8--3.0mm |
|
Surface treatment |
Electrostatic powder coating |
|
Packaging |
With polyfoam inner lining and multi-layer carton box.(wooden carton available) |
|
Dimension& color |
Can according to the customer's specific requirements |
|
Packing Volume |
0.34m3/bays |
|
Supply ability & Trade terms |
|
|
MOQ |
3 pcs |
|
Supply ability |
5000pcs/month |
|
Delivery |
15-30 days |
Chassis: Welded chassis, steel is good, no deformation, the surface spray, the factory installed before the calibration test, 3mm
hot plate bending, 204 universal bearing φ20mm short axis docking, the middle to galvanized pipe connection, front with dedicated
Bearing, anti-tilt device.
Upright: 1.2mm thick Shanghai Baosteel SPCC cold-rolled plate bending forming, steel plate in line with GB / T11253-89 standards.
Material for the SPCC, ST12 and Q195-235, partitions, side panels should be able to adjust the height along the vertical direction
of the column, the column hanging plate hole spacing of 50mm.
Shelf board: 1.0mm Shanghai Baosteel SPCC cold-rolled plate, baffle bending thickness of 25mm, using three bending process,
single-sided partition on the uniform load 80KG, 24 hours after unloading, no cracks and permanent deformation.
Sealing device: Magnetic seal, and a dust, anti-rat device.
Locking device:Each column can be locked, each combination can be locked.
Transmission mechanism: Integrated transmission mechanism, the factory assembly verification precision machining sprocket,
indirect transmission, three speed, the use of motorcycle chain.
Handle: Free clutch-type folding handle or disc-type swing handle, the structure of the ratchet automatic hanging gear, disabled,
the handle can be suspended in the vertical position.
Surface treatment: Surface by phosphating, pickling, electrostatic spray, etc. thirteen processing. Import Germany sprayequipment, the use of Shanghai Phantom of the thermosetting powder, matt electrostatic spray.
Ground track: Using 20 * 20mm solid square steel, galvanized surface, back surface welding, limit device, 3mm rail protectionplate surface spray.
Installation requirements:
After the installation of the track, in any 1m long, the horizontal difference of not more than 1mm, the corresponding deviation
between the orbit level of not more than 1mm, the parallelism between the two tracks deviation of <0.1-0.3mm, the total length of not more than 2mm.
){kind=link}
){kind=link}